Reeds


Unlike other loom makers, Leclerc manufactures their own Reeds to ensure the level of quality and to provide a broad selection to support their full range of looms. Other non-Leclerc reeds may not fit the Leclerc Batten design properly causing problems with the shed.

Stainless Steel Reeds, which resist rusting, are available from 4 to 25 dents per inch in lengths from 9 1/2" (24 cm) to 120" (305 cm). Note that the lengths refer to the Leclerc loom weaving width they fit and not the actual physical reed length.

Custom length reeds that may fit looms by other manufacturers can be special ordered by using the part code for the next largest length and specifying the actual physical length the reed is to be cut to in the Comments section of our order form. It is the buyers responsability to verify the width and thickness will work with their loom. All reeds have inside width of 3 1/2" (8.9 cm) and outside width of 4 3/4" (12.1 cm). Click Here to see the full set of dimensions.

NOTE:Because Leclerc has manufactured some slightly smaller/larger loom variations, mistaken orders can be avoided by determining the actual Leclerc loom model and determining the actual weaving width. Contact us if you are unsure of your loom type and size.

To simplify the job of finding the proper reed, the charts below are broken into 3 sizes of looms:


GO TO: Table Looms Floor Looms Large Floor Looms
For Reeds with a weaving width of: 9 1/2 to 24 inches
(24 to 60 cm)
24 to 60 inches
(60 to 150 cm)
72 to 120 inches
(180 to 305 cm)
Leclerc Loom Models: Diana, Dorothy, Meco, Medico,
Minerva, Nilec, Voyageur
Artisat, Colonial, Compact, Fanny, Gobelin, Inca, Initiation,
Iris, Mira, Nilart, Nilus, Nilus II,Tissart, Weavebird
Gobelin, Kebec
Notes
  • Not sure what model of loom you have? Check Here for a description of all the Leclerc loom designs.
  • We can special order reeds in any length but cannot change these dimensions
  • Leclerc Reeds may fit looms from other manufacturers but we cannot guarantee this. The dimensions at the link above should be used to determine this

The Leclerc Reed Stand is the perfect way
to organize and protect your reed collection.


Reeds for Table Looms

For Table Looms, Leclerc makes Stainless Steel Reeds, that resist rusting, in size of 4 to 25 dents per inch. All are available in lengths from 9 1/2" (24 cm) to 24" (60 cm). 15 inch reeds are also available and can be ordered by specifying the 15 3/4" reed part number and noting that the loom is a 15 inch model in the Comment field of the order form.

Dents
per Inch
Metal Reed Length
9 1/2 inches
(24 cm)
15 3/4 inches
(40 cm)
22 inch
(56 cm)
24 inches
(60 cm)
4 Stainless
Steel
6590-9004
$69 CDN
$63 US
6591-6004
$69 CDN
$63 US
6592-2004
$96 CDN
$88 US
6592-4004
$105 CDN
$96 US
5 Stainless
Steel
6590-9005
$69 CDN
$63 US
6591-6005
$69 CDN
$63 US
6592-2005
$96 CDN
$88 US
6592-4005
$105 CDN
$96 US
6 Carbon
Steel
N/A 6531-6030
$38 CDN
$35 US
N/A N/A
Stainless
Steel
6590-9006
$69 CDN
$63 US
6591-6006
$69 CDN
$63 US
6592-2006
$96 CDN
$88 US
6592-4006
$105 CDN
$96 US
8 Carbon
Steel
N/A 6531-6040
$38 CDN
$35 US
N/A N/A
Stainless
Steel
6590-9008
$69 CDN
$63 US
6591-6008
$69 CDN
$63 US
6592-2008
$96 CDN
$88 US
6592-4008
$105 CDN
$96 US
10 Carbon
Steel
N/A 6531-6050
$38 CDN
$35 US
N/A N/A
Stainless
Steel
6590-9010
$69 CDN
$63 US
6591-6010
$69 CDN
$63 US
6592-2010
$96 CDN
$88 US
6592-4010
$105 CDN
$96 US
11 Stainless
Steel
6590-9011
$69 CDN
$63 US
6591-6011
$69 CDN
$63 US
6592-2011
$96 CDN
$88 US
6592-4011
$105 CDN
$96 US
12 Stainless
Steel
6590-9012
$69 CDN
$63 US
6591-6012
$69 CDN
$63 US
6592-2012
$96 CDN
$88 US
6592-4012
$105 CDN
$96 US
14 Stainless
Steel
6590-9014
$69 CDN
$63 US
6591-6014
$69 CDN
$63 US
6592-2014
$96 CDN
$88 US
6592-4014
$105 CDN
$96 US
15 Stainless
Steel
6590-9015
$69 CDN
$63 US
6591-6015
$69 CDN
$63 US
6592-2015
$96 CDN
$88 US
6592-4015
$105 CDN
$96 US
16 Stainless
Steel
6590-9016
$79 CDN
$71 US
6591-6016
$79 CDN
$71 US
6592-2016
$110 CDN
$99 US
6592-4016
$120 CDN
$108 US
18 Stainless
Steel
65909018
$79 CDN
$71 US
65916018
$79 CDN
$71 US
65922018
$110 CDN
$99 US
65924018
$120 CDN
$108 US
20 Stainless
Steel
6590-9020
$79 CDN
$71 US
6591-6020
$79 CDN
$71 US
6592-2020
$110 CDN
$99 US
6592-4020
$120 CDN
$108 US
25 Stainless
Steel
6590-9025
$79 CDN
$71 US
6591-6025
$79 CDN
$71 US
6592-2025
$110 CDN
$99 US
6592-4025
$120 CDN
$108 US



Floor Loom Reeds

For standard sized Floor Looms, Leclerc makes Stainless Steel Reeds in size of 4 to 25 dents per inch. All are available in lengths from 24" (60 cm) to 60" (150 cm).

Dents
per Inch
Metal Reed Length
24 inches
(60 cm)
27 inches
(70 cm)
32 inches
(80 cm)
36 inches
(90 cm)
45 inches
(115 cm)
60 inches
(150 cm)
4 Stainless
Steel
6592-4004
$105 CDN
$96 US
6592-7004
$119 CDN
$108 US
6593-2004
$141 CDN
$128 US
6593-6004
$158 CDN
$144 US
6594-5004
$198 CDN
$180 US
6596-0004
$264 CDN
$240 US
5 Stainless
Steel
6592-4005
$105 CDN
$96 US
6592-7005
$119 CDN
$108 US
6593-2005
$141 CDN
$128 US
6593-6005
$158 CDN
$144 US
6594-5005
$198 CDN
$180 US
6596-0005
$264 CDN
$240 US
6 Stainless
Steel
6592-4006
$105 CDN
$96 US
6592-7006
$119 CDN
$108 US
6593-2006
$141 CDN
$128 US
6593-6006
$158 CDN
$144 US
6594-5006
$198 CDN
$180 US
6596-0006
$264 CDN
$240 US
8 Carbon
Steel
N/A N/A N/A N/A 6534-5040
$114 CDN
$105 US
N/A
Stainless
Steel
6592-4008
$105 CDN
$96 US
6592-7008
$119 CDN
$108 US
6593-2008
$141 CDN
$128 US
6593-6008
$158 CDN
$144 US
6594-5008
$198 CDN
$180 US
6596-0008
$264 CDN
$240 US
10 Stainless
Steel
6592-4010
$105 CDN
$96 US
6592-7010
$119 CDN
$108 US
6593-2010
$141 CDN
$128 US
6593-6010
$158 CDN
$144 US
6594-5010
$198 CDN
$180 US
6596-0010
$264 CDN
$240 US
11 Stainless
Steel
6592-4011
$105 CDN
$96 US
6592-7011
$119 CDN
$108 US
6593-2011
$141 CDN
$128 US
6593-6011
$158 CDN
$144 US
6594-5011
$198 CDN
$180 US
6596-0011
$264 CDN
$240 US
12 Stainless
Steel
6592-4012
$105 CDN
$96 US
6592-7012
$119 CDN
$108 US
6593-2012
$141 CDN
$128 US
6593-6012
$158 CDN
$144 US
6594-5012
$198 CDN
$180 US
6596-0012
$264 CDN
$240 US
14 Stainless
Steel
6592-4014
$105 CDN
$96 US
6592-7014
$119 CDN
$108 US
6593-2014
$141 CDN
$128 US
6593-6014
$158 CDN
$144 US
6594-5014
$198 CDN
$180 US
6596-0014
$264 CDN
$240 US
15 Stainless
Steel
6592-4015
$105 CDN
$96 US
6592-7015
$119 CDN
$108 US
6593-2015
$141 CDN
$128 US
6593-6015
$158 CDN
$144 US
6594-5015
$198 CDN
$180 US
6596-0015
$264 CDN
$240 US
16 Stainless
Steel
6592-4016
$120 CDN
$108 US
6592-7016
$135 CDN
$122 US
6593-2016
$160 CDN
$144 US
6593-6016
$180 CDN
$162 US
6594-5016
$225 CDN
$202 US
6596-0016
$300 CDN
$270 US
18 Stainless
Steel
6592-4018
$120 CDN
$108 US
6592-7018
$135 CDN
$122 US
6593-2018
$160 CDN
$144 US
6593-6018
$180 CDN
$162 US
6594-5018
$225 CDN
$202 US
6596-0018
$300 CDN
$270 US
20 Stainless
Steel
6592-4020
$120 CDN
$108 US
6592-7020
$135 CDN
$122 US
6593-2020
$160 CDN
$144 US
6593-6020
$180 CDN
$162 US
6594-5020
$225 CDN
$202 US
6596-0020
$300 CDN
$270 US
25 Stainless
Steel
6592-4025
$120 CDN
$108 US
6592-7025
$135 CDN
$122 US
6593-2025
$160 CDN
$144 US
6593-6025
$180 CDN
$162 US
6594-5025
$225 CDN
$202 US
6596-0025
$300 CDN
$270 US



Reeds for Large Floor Looms

For Large Floor Looms, Leclerc makes Stainless Steel Reeds, that resist rusting, in sizes of 4, 5, 6, 8, 10, 11, 12, 15, 16, 18, 20 and 25 dents per inch. All are available in lengths of 72" (180 cm), 90" (228 cm), 100" (250 cm) and 120" (305 cm).

Dents
per Inch
Metal Reed Length
72 inches
(180 cm)
90 inches
(228 cm)
100 inches
(250 cm)
120 inches
(305 cm)
4 Stainless
Steel
6597-2004
$316 CDN
$250 US
6599-0004
$395 CDN
$360 US
6591-0004
$440 CDN
$400 US
6591-2004
$528 CDN
$480 US
5 Stainless
Steel
6597-2005
$316 CDN
$250 US
6599-0005
$395 CDN
$360 US
6591-0005
$440 CDN
$400 US
6591-2005
$528 CDN
$480 US
6 Stainless
Steel
6597-2006
$316 CDN
$250 US
6599-0006
$395 CDN
$360 US
6591-0006
$440 CDN
$400 US
6591-2006
$528 CDN
$480 US
8 Stainless
Steel
6597-2008
$316 CDN
$250 US
6599-0008
$395 CDN
$360 US
6591-0008
$440 CDN
$400 US
6591-2008
$528 CDN
$480 US
10 Stainless
Steel
6597-2010
$316 CDN
$250 US
6599-0010
$395 CDN
$360 US
6591-0010
$440 CDN
$400 US
6591-2010
$528 CDN
$480 US
11 Stainless
Steel
6597-2011
$316 CDN
$250 US
6599-0011
$395 CDN
$360 US
6591-0011
$440 CDN
$400 US
6591-2011
$528 CDN
$480 US
12 Stainless
Steel
6597-2012
$316 CDN
$250 US
6599-0012
$395 CDN
$360 US
6591-0012
$440 CDN
$400 US
6591-2012
$528 CDN
$480 US
14 Stainless
Steel
6597-2014
$316 CDN
$250 US
6599-0014
$395 CDN
$360 US
6591-0014
$440 CDN
$400 US
6591-2014
$528 CDN
$480 US
15 Stainless
Steel
6597-2015
$316 CDN
$250 US
6599-0015
$395 CDN
$360 US
6591-0015
$440 CDN
$400 US
6591-2015
$528 CDN
$480 US
16 Stainless
Steel
6597-2016
$360 CDN
$324 US
6599-0016
$450 CDN
$405 US
6591-0016
$500 CDN
$450 US
6591-2016
$600 CDN
$540 US
18 Stainless
Steel
6597-2018
$360 CDN
$324 US
6599-0018
$450 CDN
$405 US
6591-0018
$500 CDN
$450 US
6591-2018
$600 CDN
$540 US
20 Stainless
Steel
6597-2020
$360 CDN
$324 US
6599-0020
$450 CDN
$405 US
6591-0020
$500 CDN
$450 US
6591-2020
$600 CDN
$540 US
25 Stainless
Steel
6597-2025
$360 CDN
$324 US
6599-0025
$450 CDN
$405 US
6591-0025
$500 CDN
$450 US
6591-2025
$600 CDN
$540 US


Leclerc Loom Catalog HAVE SOME QUESTIONS?
Contact us for help in answering questions
about Leclerc looms and accessories.

If you are looking for a Weaving Loom
see our Leclerc Loom Comparison Chart
for more help in deciding which loom is right for you.


How to Order:
Orders may be placed using our secure Online Order Form (this form should open in another window). Click Here for more information on how to place an order as well as our terms and conditions.

Payment/Currency:
Payment can be made using VISA or Mastercard, Cheque or Money Order in US or Canadian funds. US credit card purchases are billed directly in US funds eliminating any foreign currency conversion charges by the credit card company.

Product Directories
If you are looking for other items on our website, try using our product directories to quickly find what you are looking for! Our products are grouped as follows:

Knitting Product Index
Weaving/Spinning Product Index
Books, Magazines & Videos.
Price/Shipping Quote?
If you would like an exact quote for any items complete with shipping costs, please call or email us at nmanners@camillavalleyfarm.com with you location and we will provide this.

Gift Certificate
If you are looking for a gift for a Knitter or Weaver and can't figure out what they want, a Camilla Valley Farm Gift Certificate is an excellent way to ensure you get the perfect gift! We can also email gift certificates if you are running out of time!

Latest News/Updates
Keep up to date with what is new at Camilla Valley Farm by following us on Instagram! (Click on the logo below)

Camilla Valley Farm Instagram


Back To: Camilla Valley Farm Button



Last Updated: Friday February 19th, 2021